HOW TO PREPARE
Mixing Instructions
- Place the sealed activation packet into your mixing bottle (do not open or cut it).
- Fill with purified or distilled water to the exact amount listed on the activation packet (16 oz, 32 oz, etc.).
- Close, shake, and let sit for 1 minute.
- Pour the solution into your spray bottles.
Good to Know
- Each activation packet is single use.
- You can leave the used packet in the mixing bottle until you’re ready to make a new batch; then empty the bottle, remove, and discard the packet before adding a new one.
HOW TO APPLY
For best results,
- Remove visible dirt or debris before spraying.
- Spray directly onto the surface until evenly wet. High-touch areas should remain visibly wet for optimal performance.
- Allow to air dry. Do not wipe off unless cleaning excess residue or direct food-contact surfaces (rinse with water after treating cutting boards or food prep areas).
- As long as the surface remains visibly wet, the solution is actively breaking down germs and odor-causing bacteria.
- Reapply as needed for high-traffic or frequently touched areas.
For High-Touch Surfaces - Door handles, switches, remotes, appliance buttons, railings, and shared surfaces.
For Kitchen & Food Areas - Counters, sinks, refrigerator handles, trash lids, and cutting boards (rinse after direct food contact).
For Nursery & Child Spaces - Highchairs, changing tables, toys (hard surfaces), playpens, and diaper bins.
For Mudroom & Entry Zones - Shoes, entryway floors, storage benches, sports gear.
For Travel & Public Spaces - Suitcases, rental car interiors, hotel surfaces, shared desks.
CARE & STORAGE
Storage
- Store in a cool, dry place away from heat and direct sunlight.
- Once mixed, keep in an opaque bottle.
- Store at room temperature (60–80°F).
- For consistent performance, refresh your solution within the recommended timeframe.
Bottle Care
- For best results, use River Refresh bottles designed for proper storage and protection from light.
- Do not reuse bottles that previously contained other cleaners, chemicals, or personal care products, as residue may affect stability and performance.
- Clean the spray nozzle periodically to prevent buildup or clogging.
- Do not freeze or expose to extreme heat.
SAFETY INFORMATION
- For external use only.
- Avoid direct contact with eyes. If contact occurs, rinse thoroughly with water.
- Safe for all skin types and all ages. Patch test if you have highly sensitive skin.
- If irritation develops, discontinue use and consult a healthcare professional.
- For deep wounds, serious burns, or persistent skin conditions, consult a physician.
- Keep Activation Packets™ out of reach of children and pets (small components may present a choking hazard).
Medical Disclaimer
This product is not intended to diagnose, treat, cure, or prevent any disease. The information provided is for general informational purposes only and is not medical advice. If you have a chronic skin condition, are under medical care, or have concerns about how this product may interact with your routine, consult a qualified healthcare professional.
WHEN WILL I GET MY ORDER?
We typically ship orders within 1–2 business days. Once your order ships, you’ll receive a confirmation email with tracking information.
Delivery times vary based on your location and carrier. You can monitor your shipment using the tracking link provided.
If you have questions about your order, contact us at Marc@RiverRefresh.com and we’ll take care of you.
Why Fresh Activation Matters
Each Activation Packet™ is formulated to create Hypochlorous Acid (HOCl) at its intended concentration (ppm) and pH when mixed with purified or distilled water.
HOCl naturally degrades with exposure to light, heat, air, and water quality. By activating it yourself, you control when it’s made and how it’s stored.
Fresh activation helps ensure:
• Intended concentration for the task
• pH balanced for targeted use
• Reliable antimicrobial performance
When mixed and stored in opaque bottles away from heat and direct sunlight, the solution is expected to maintain strength close to its published concentration for at least 45 days. After that, natural degradation continues and concentration will gradually decline — which is why we recommend refreshing your solution regularly for consistent performance..
When It’s Wet, It’s Working™
Hypochlorous Acid gets to work on contact. Spray generously and let it air dry — there’s no need to wipe it away. As long as the surface remains visibly wet, the solution is actively interacting with germs and odor-causing bacteria.
It leaves no residue and is non-toxic, making it safe for everyday use around kids and pets.